Plastic HDPE/PP pipe, barrel, basket, crate, lumps and sheet recycling washing machine

 Plastic HDPE/PP pipe, barrel, basket, crate, lumps and sheet recycling washing machine

Device overview

The machine is special for recycle HDPE LDPE LLDPE PP EVA ABS PVC crate, basket,lumps, sheet,pipes and so on. If the pipe or crate is too big or thickness, then first you can use a shredder to make a little small and then to wash it.

1. The whole line flowing is : conveyer belt - crusher - Screw loader - floating - screw loader - frication machine - Screw loader - dewater - screw loader - hot pipe dryer. 

2. The capacity can be supplized accroding to your requrement, such as : 300kg/h, 500kg/h, 800kg/h, 1000kg/h,1500kg/h, 2000kg/h

3. How many parts do you need is according to your require.such as floating ,you can use one set or two sets, and also three sets, this is up to how dirty of your raw material. Of courese, you can show us your raw material, we can design the much correct machine for you according to the material situation.

4. You can choose full automatic or half-automatic line.

5. We have SGS certifcation, past CE certifcation.

6. After drying the water content can reach 5-8% (according to the thickness of film)

Application material and final products

waste plastic pipe basket.jpg

Layout of the machine

waste PP raffia washing.jpg

Parameter of such kinds machine

CapacityTotal power(kW)Labour requiredWater required(m³/h)


Get A Free Quote

Machine details

shreeder for big pipes.jpg

Shredder and Crusher

There are single shaft shredder and double shaft shredder, different shredder is used for different material,mostly the material will be packed in bundle which is easy for transportation, so then you can feed the bundle packed material directly into the shredder. Special design feeder hopper can advoid the materilal come out, and rotating knives with special knives holder can increase the capacity of the machine. Metal detector on the belt conveyor can check out the metal. And the Crusher is used to crush big piece of material into small size. With water inside to clean the material and cool the blade during crushing process. Different output capacity needs different type crusher.

hot washing tank.jpg

Floating Washer

In floating wsasher, PP PE bottle flakes will float on the water, so the washing roller will push them to sink into the water to wash them clean. At this time,the sediment,metal and other dirty or impurity can be effectively separated and sink to the  washer bottom to drain out. The floating washer can have heating function to clean ink, oil , grease ,paper and gule on the bottle flakes. And we can use a cover to keep water warm.

vertical dewater for hard material.jpg

Dryer System

High centrifugal force will be created by advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering, then almost all of the water in the material can be threw out. The machine with Higher output and lower energy consumption. After it they hot pipe dryer will dry the material with hot wind to dry the material again. So that the material humidity can be less than 10%

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible.

File( Picture Or Draft)