PP PE PVC pipes lupmps, head material shredder and crusher

Skew pusher shredder

wobide skew pusher shredder,the pusher have 15 degree angle with the level,this kind design the resistance is more smaller than horizontal pusher shredder,the shredding speed is more quickly,the capacity is 20% more than horizontal pusher shredder,And also because the knife shredding angle is different,it can shred the maerial from the top,not like horizontal pusher shredder it can shred the material only from the front,so angle pusher shredder can use for big diameter material than horizontal pusher shredder.

Knives on the shaft

Wobide angel pusher shredder the shredding chamber with the bracket leg is one steel panel,and the horizontal pusher shredder is separately welding,so wobide shredder is more heavy,working stable,but the separately welding shredder because of  long time shake,it is easy to open welding and damage.

Crusher

Make the material into small pieces from shredder.

Rotating knife

1. The special four-side design of the shredder  rotating knife can save the user cost by using it multiple times.

2, Imported abroad tools, to ensure that the material D2 is pure and reliable, after multiple heat treatment and vacuum deep cooling to ensure knife life.the capacity is more than 1000 tons.

Fixed knife

The shredder's fixed knife cutting production guarantees that the error will not exceed 5 wires, which can adjust the rotating knife and the fixed knife  distance minimum of 0.5mm. The imported materials ensure that the quality is pure and reliable. After the wear, it can be turned 180 degrees to use again.

Shredder and crusher application

Shredder crusher the big thick pipes lumps or other hard material in advance. And then they will be send into the crusher to make small pieces, The final small pieces of material can be used to make granules or others.