Waste Plastic Stretch LLDPE, Food Packing Bags, nylon Polybags Recycling Crusher Washing Drying Plant

Waste Plastic Stretch LLDPE, Food Packing Bags, nylon Polybags Recycling Crusher Washing Drying Plant

Device overview

The machine is special for recycle Waste Plastic Stretch LLDPE, Food Packing Bags,nylon Polybags and so on. Waste packing material and hard plastics also can be treated step by step. You can put dirty film/bags direct to wash it, after washing it you can use them to pelletize or injection or do other things.

1. The whole line flowing is : conveyer belt - crusher - Screw loader - floating - screw loader - frication machine - Screw loader - dewater - screw loader - hot pipe dryer. 

2. The capacity can be supplized accroding to your requrement, such as : 300kg/h, 500kg/h, 800kg/h, 1000kg/h,1500kg/h, 2000kg/h

3. How many parts do you need is according to your require.such as floating ,you can use one set or two sets, and also three sets, this is up to how dirty of your raw material. Of courese, you can show us your raw material, we can design the much correct machine for you according to the material situation.

4. You can choose full automatic or half-automatic line.

5. We have SGS certifcation, past CE certifcation.

6. After drying the water content can reach 5-8% (according to the thickness of film)

Application material and final products

waste plastic squeezed.jpg

Layout of the machine

PE grind recycling layout.jpg

Parameter of such kinds machine

CapacityTotal power(kW)Labour requiredWater required(m³/h)


Get A Free Quote

Machine details

belt conveyor and crusher.jpg

Belt Conveyor and Crusher

The belt conveyor is used to transport the plastics to crusher. All contacted with raw material parts is made of stainless steel,and the machine controlled by inverter. If there is metal in the material, you can add one metal detector to check out the melt. And the Crusher is used to crush big bags into small size. With water inside to clean the material and cool the blade during crushing process. Different output capacity needs different type crusher.

washer with roller.jpg

Floating wahser

In floating wsasher, PP PE film flakes will float on the water, so the washing roller will push them to sink into the water to wash them clean. At this time,the sediment,metal and other dirty or impurity can be effectively separated and sink to the  washer bottom to drain out. The floating washer can have heating function to clean ink, oil , grease ,paper and gule on the film flakes.

screw loader.jpg

Screw Loader

Screw loader, it also can make loader with friciton function, so it not only can conveyor the material into next step, but also can wash the material with friction. Dirty material can be washed more clean, and if the material is not so dirty, only use screw loader or use friciton screw loader can reduce one floating washer to reduce the cost.

horizontal dewater dryer.jpg

High Speed Dewater Machine

High centrifugal force will be created by advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering, then almost all of the water in the material can be threw out. New design make the machine with Higher output and lower energy consumption. Final material humitity will be less than 12%.

plastic waste washer.jpg

Screw Dryer System

Dry the material with hot wind again, and with screw to mix the material, so that the material can be send into the granulator directly.

plastic squeezed dewater.jpg

Squeezer Dryer Machine

This machine is mainly used for PE film woven bags Raffia Bags. With special designed screw and heater, water and volume of the PP PE film/bags/raffia will be pressed out.so that the final product of the PP PE will become half-plasticized and cut by pelletizer. Then after squeeze dryer the moisture will be lowered down to 1-3%, it can improve the next granulation machine capacity and can cut the cost of the granulation machine. Use such machine, then you can put the washed materila directly into it with water. Then no need hot dryer system

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible.

File( Picture Or Draft)